GripFactory Anti-Slip Standard Tape

GripFactory Anti-Slip Standard Tape is the solution to provide the steps, intermediate platforms or other steps with a non-slip layer. GripFactory Anti-Slip Standard Tape can also be used as signaling. GripFactory Anti-Slip Standard Tape is available in standard widths of 25, 50 or 100 mm, on rolls of 18 meters.

GripFactory Anti-Slip standard Tape is available from stock and available in various colors (black, yellow, red, blue, green, transparent & grey).

Description

Downloads

Projects

Description

How does Anti-Slip Standard Tape work?

GripFactory Anti-Slip Standard Tape is very easy to apply yourself. Due to the special surface structure, this anti-slip tape has an extremely high anti-slip value but is still very clean to keep.

Benefits of using Anti-Slip Standard Tape

With GripFactory Anti-Slip Standard Tape you are assured of a long-term solution against sliding surfaces.

Anti-Slip Standard Tape is suitable for the following surfaces

Technical data

Durability: GripFactory Anti-Slip Standard Tape is impregnated with a hard ‘ diamond aluminum oxide ‘, which creates a very strong tape with a long life span.
Adhesion: GripFactory Anti-Slip Standard Tape is treated with a special (heavy) coating, which keeps the permanent pressure sensitivity of the adhesive edge good.
Resistance: GripFactory Anti-Slip Standard Tape is resistant to solvents and other aggressive products.
Temperature: GripFactory Anti-Slip Standard Tape is designed to withstand extreme temperatures (tested to-40 °C and + 80 °C).

Topic	Result	Test method
Back Carrier	0.1 mm thick foil	Calliper method
Total thickness applied	0.7 mm	Calliper method
Type of adhesive	Solvent acrylic	n/a
Mineral type	Alumina	n/a
Adhesion to steel (g/25.4 mm2)	1500	PSTC-4
Tensile strength (kg/25.4 mm2)	6	PSTC-31
Tear Resistance (g)	5600 +/- 200	PSTC-39
Peel adhesion (n/25 mm)	23,5	180 degrees FINAT FTMI
Tensile strength (n/25 mm)	68,0	Lloyd, 500 N charge cell
Elongation at break	25%	PSTC-31
Temperature range (C)	-40 to + 80 degrees	see below
Maximum size of production roll	1168 mm x 100 m	n/a
Resistant to water (months)	10	PSTC-35
Resistant to chemicals (months)	8	PSTC-35
Resistant to engine oil	Excellent	PSTC-35
Lifetime (months)	12 to 24	PSTC-9

Technical Specifications for GripFactory Anti-Slip Standard Tape

Color	RAL Reference
Black	9004
Blue	5000
Brown	8002
Green	6010
Yellow	1023
Red	3020
Orange	2004
Fluorescent Yellow	1016
White	9003
Beige	1000
Grey	7004
Red/White	3000 / 9016
Black/Yellow	1023 / 9017

LRV Test Results

Color	LRV (average)	Range
Black	3,8	0,16
Blue	7,7	0,41
Brown	6,5	0,49
Green	7,5	0,29
Yellow	48,4	0,59
Red	13,3	1,71
Orange	30,1	0,82
Fluorescent Yellow	103,6	0,71
White	87,7	0,29
Grey	30,3	0,48

Friction coefficient and comparison of various surfaces

Type of surface	Dry substrate	Wet surface
Anti-slip tape – coarse	1,33	1,21
Anti-slip tape – Standard	1,29	1,09
Anti-slip tape – Fine	1,37	1,17
Ribbed rubber	0,89	0,76
Standard anti-slip paint	0,69	0,50
Painted steel	0,77	0,69
Structure vinyl	0,80	0,64
Ribbed vinyl	0,85	0,72

Friction coefficient

Test	Dry substrate	Wet surface	Test Standard
Pendulum	102 TRL	71 TRL	BS EN 13036-4L
DIN51130	R13		97910801.001
DIN51097	Gradient at 30 degrees C		97910801.004
NFSI	High traction		Up to 15-07-2019

The above tests were carried out in accordance with test standards. The tests were conducted at recognized independent friction control laboratories. Pendulum is a dynamic test, for static testing We also have results ASTM C 1028-96.

Downloads

Projects

Anti-slip Liquids

Anti-slip Coatings

Anti-slip Plates

Anti-slip Tapes

Anti-slip Treads

Anti-slip Accessories

GripFactory Anti-Slip Standard Tape